Drill Required Baby Gate 26.4"-43" W x 29" H

Lot 531 in Liquidation Auction 281 Wednesday. Sold by Timewell Auctions in Woodstock, ON.

Opening bid
$1.00
Bidding
On HiBid: Bid on HiBid
Closes
Condition
Condition unknown
Delivery
Pickup or shipping
Pickup
Woodstock, ON
Filed under
Baby & Toddler > Baby Safety

Description

Model: SH21.002G
Notes: Previously opened box, similar to photo
Title: Drill Required Baby Gate 26.4"-43" W x 29" H

HARDWARE-MOUNTED - DRILLING REQUIRED: This is not a pressure-mounted gate. Install the included brackets and screws onflat, solid, parallel mounting surfaces. For drywall, fasten into wall studs or another verified structural support. Check compatibility before drilling. FITS 26.4-43 IN WIDE, 29 IN STANDARD HEIGHT: Measure the opening at both the upper and lower bracket positions beforeordering. Both measurements must be within 26.4-43 inches. This model is 29 inches tall; choose the 39-inch variationif you need an extra-tall barrier. CHECK BASEBOARDS, TRIM AND STAIR POSTS: Baseboards, chair rails, uneven walls, round posts or metal mounting surfacesmay prevent the brackets from sitting flat and may require a compatible mounting solution. Do not install until bothsides can be aligned vertically. LEVEL, ALIGN AND TEST BEFORE FINAL TIGHTENING: Temporarily position both mounting sides, level the gate and align thelatch before fully tightening all screws. Open and close the gate several times to confirm smooth travel, secure latching and proper auto-close operation. CLEAR WALK-THROUGH FOR EVERYDAY ACCESS: The no-bottom-bar design helps reduce tripping hazards. The gate auto-closeswhen opened under 90 degrees, stays open at 90 degrees and swings in both directions for convenient adult access.

Photos

Drill Required Baby Gate 26.4"-43" W x 29" HDrill Required Baby Gate 26.4"-43" W x 29" HDrill Required Baby Gate 26.4"-43" W x 29" HDrill Required Baby Gate 26.4"-43" W x 29" H

More from Liquidation Auction 281 Wednesday

See every lot in Liquidation Auction 281 Wednesday